ONE-SHOT 2008

ONE-SHOT 2008

FEATURES:

Totally self contained
Light & compact
Ergonomically designed
Zero static tip
Interchangeable standard tips
Highest quality material
Long life, low cost filter
Electronic temperature control
Long life, extra hard heating head
Quick release stainless solder collector
Power ON/OFF switch
Economical price

Completely Portable:

The ONE-SHOT desoldering tools is a totally self contained unit, all it needs is a standard, electrical outlet. Both 110 & 240 VAC units available.

Heater power consumption:60 WATTS

Efficient design - Perfect working angle:

The ONE-SHOT incorporate the ultimate design for working comfort: perfect balance, ideal working angle, such that the work (P.C. board, etc.) lies flat on the table top.

Light weight:

The ONE-SHOT weights only 1.1 Lb. (500g), excluding cord.

High quality materials:

This super tool utilizes the highest quality materials: i.e. all internal plastic parts, including the tweezers, are made from super tough, high temperature Hytrell* , and the case, trigger, and nose piece are made from high strength, high temperature, glass filled Valox **.

Easy to clean:

The ONE-SHOT generates a high-speed, "one-shot" vacuum wave every time the trigger is squeezed. This fast action vacuum causes the molten solder to flow immediately into the collector tube, thru the shortest possible path, where the solder is solidified into small particles. The unique solder collector assembly allows the removal of the collector by simply pushing is back and out. Inside is the specially designed filter which not only stops solder, but fumes and powered debris. The entire cleaning operation takes a few seconds, and can be done while the tool is hot using the high temperature tweezers provided.

	Completely Portable:
	The ONE-SHOT desoldering tools is a totally self contained unit, all it needs is a standard, electrical outlet. Both 110 & 240 VAC units available.
	Heater power consumption:60 WATTS
	Efficient design - Perfect working angle:
	The ONE-SHOT incorporate the ultimate design for working comfort: perfect balance, ideal working angle, such that the work (P.C. board, etc.) lies flat on the table top.
	Light weight:
	The ONE-SHOT weights only 1.1 Lb. (500g), excluding cord.
	High quality materials:
	This super tool utilizes the highest quality materials: i.e. all internal plastic parts, including the tweezers, are made from super tough, high temperature Hytrell* , and the case, trigger, and nose piece are made from high strength, high temperature, glass filled Valox **.
	Easy to clean:
	The ONE-SHOT generates a high-speed, "one-shot" vacuum wave every time the trigger is squeezed. This fast action vacuum causes the molten solder to flow immediately into the collector tube, thru the shortest possible path, where the solder is solidified into small particles. The unique solder collector assembly allows the removal of the collector by simply pushing is back and out. Inside is the specially designed filter which not only stops solder, but fumes and powered debris. The entire cleaning operation takes a few seconds, and can be done while the tool is hot using the high temperature tweezers provided.